STANDARDS
¡P
ANSI Fibre Channel FC-FS
¡P
ANSI Fibre Channel FC-PH
¡P
ANSI Fibre Channel FC-PI
¡P
ANSI Fibre Channel FC-AL
¡P
ANSI Fibre Channel FC-PLDA
¡P
ANSI Fibre Channel FC-MI
¡P
ANSI Fibre Channel FC-FLA
¡P
PCI-X 1.0a
¡P
PCI local bus revision 2.2 (see power requirements)
¡P
Fibre Channel Class 2, 3
¡P
PHP hot plug - hot swap
ARCHITECTURE
¡P
Emulex Pegasus ASIC technology
¡P
up to 133MHz PCI-X DMA
¡P
2Gb/s or 1Gb/s FC Link
¡P
2MB FLASH memory
¡P
2MB QDR SRAM
SOFTWARE ENVIRONMENTS
¡P
Windows Server 2003
¡P
Windows 2000
¡P
Windows NT
¡P
HP-UX
¡P
Linux
¡P
NetWare
¡P
Solaris
HARDWARE ENVIRONMENTS
¡P
x86, SPARC and PowerPC PCI hardware platforms
¡P
3.3V signaling, 5V tolerant
¡P
32/64b 33/66MHz PCI
¡P
66/100/133MHz PCI-X
PHYSICAL DIMENSIONS
¡P
Short low profile MD2 form factor
¡P
Low profile or standard bracket167.64mm x 64.42mm (6.60" x 2.54")
OPTICAL
¡P
Data rates: 1.0625/2.125Gb/s
¡P
Optics: short/long wave lasers
¡P
Cable:
o
9/125£gm single-mode fiber
o
50/125£gm multi-mode fiber
o
62.5/125£gm multi-mode fiber
¡P
Connector: LC
¡P
Distance:
o
(1Gb/s)
¡±
10K meters (32,800) 9/125 £gm fiber
¡±
500 meters (1,640) 50/125 £gm fiber
¡±
300 meters (984) 62.5/125 £gm fiber
o
(2Gb/s)
¡±
10K meters (32,800) 9/125 £gm fiber
¡±
300 meters (984) 50/125 £gm fiber
¡±
150 meters (492) 62.5/125 £gm fiber
POWER REQUIREMENTS
¡P
Volts: +3.3 VDC (¡Ó 5%)
¡P
Power: 7.7 watts @ 66MHz, 8.5 watts @ 133MHz (typ)
ENVIRONMENTAL CONDITIONS
¡P
Operating temperature: 0¢X to 45¢XC (32¢X to 113¢XF)
¡P
Airflow required: 100 lf/m
¡P
Storage temperature: -40¢X to 70¢XC (-40¢X to 158¢XF)
¡P
Relative humidity: 5% to 95% non-condensing
AGENCY APPROVALS
¡P
Class 1 Laser Product per DHHS 21CFR (J) & EN60825
¡P
UL recognized to UL 1950
¡P
CUR recognized to CSA22.2, No. 950
¡P
TUV certified to EN60950
¡P
FCC rules, Part 15, Class A
¡P
ICES¡V003, Class A
¡P
EMC Directive 89/336/EEC (CE Mark)
o
EN55022, Class A
o
EN55024
¡P
Australian EMC Framework (C¡VTick Mark)
o
AS/NZS 3548, Class A
¡P
VCCI, Class A
DRIVER SUPPORT
A rich suite of software complements the LP9802. Some examples of the
features included are, LUN Masking, LUN Mapping, Persistent Binding, I/O
Coalescing, full fabric boot in both x86 and Sparc environments as well
as support for multi or simultaneous protocol (SCSI & IP) operation. In
addition, most drivers include a full-featured implementation of the
FC-MI HBA Management Interface. These features enable advanced storage
area network (SAN) implementations in Windows Server 2003, Windows 2000,
Windows NT, Linux, HP-UX, Solaris and NetWare environments. All drivers
are also fully compatible with the Emulex LP10000, LP9002L, LP8000,
LP7000E, LP9402DC, and LP9002C host bus adapters. Windows, Linux and
NetWare drivers are also compatible with the LP1050, LP850, LP952L and
LP982.
¡@ |