Cost-effective Desktop Size / Fiber Capability /
Group Managed Switch
The PLANET WGSD-1022C is a desktop size Layer 2 Managed Fast
Ethernet Switch. It provides 8 10/100Mbps Fast Ethernet ports and 2
Gigabit TP/SFP interfaces. The compact-size design Switch not only
fits into space-limited environment but also is mountable in a
19-inch rack with attached rack-mounting kits. The equipped Gigabit
SFP slot makes the WGSD-1022C with capability of fiber link for
distance extending and can handle extremely large amounts of data in
a secured topology which is linked to a backbone or high capacity
servers.
The various supports of QoS mode and VLAN features make the WGSD
-1022C meet the needs of SOHOs, SMBs and enterprises in effective
data traffic control such as VoIP, video streaming and multicast
applications. The key features are shown as below:
¡@
• IP Stacking up
to 8 units
• 802.1Q VLAN
• Rapid Spanning
Tree
• SNMP / SNMP Trap
• IGMP Snooping
• SFP slots, Fiber link capability
Enhanced Layer 2 Features
The WGSD-1022C can be programmed for enhanced switch management
functions, such as per port speed configuration, Port Trunk in g,
VLAN, Rapid Spanning Tree, QoS, bandwidth control and IGMP Snooping.
The WGSD-1022C provides Port-based VLAN, 802.1Q Tagged VLAN and the
VLAN groups allowed on the WGSD-1022C will be maximally up to 255.
Via support in g port trunk in g, the WGSD-1022C offers the
operation of a high-speed trunk comb in in g multiple ports. It also
provides four groups of up to 8 ports for trunking and support s
fail-over.
Efficient Management ¡V Stacking Management
For efficient management, the WGSD-1022C is equipped with console
interface, Web interface and SNMP agent. With its built-in Web-based
management, the WGSD-1022C offers an easy-to-use,
platform-independent management and configuration facility. It
support s standard Simple Network Management Protocol (SNMP) and can
be managed via any standard-based management software. For
text-based management, the WGSD -1022C can also be accessed via
Telnet and the console port.
One of the management features of WGSD-1022C is the IP Stacking
function support. It helps network managers to easily configure up
to 8 switches in the same series via one single one IP address
instead of connecting and setting each unit one by one.
Back
pressure for half duplex, IEEE 802.3x Pause Frame for
full duplex
LED
Power,
Link/Act and speed per port
Console
Interface
One RS-232
DB-9 male connector for switch management
Dimension (W
x D x H)
280 x 173 x
44 mm, 1U height
Power
requirement
110~240V AC,
50/60Hz
Power
Consumption
12.2 watts /
41BTU
Weight
1.24 kg
Layer 2
function
Management
Interface
Console,
Telnet, Web Browser, SNMP v1 and v2c
Port
Configuration
Port disable
/ enable.
Auto-negotiation 10/100Mbps full and half duplex mode
selection.
Flow Control disable / enable. Bandwidth control on each
port.
¡@
Port Status
Display each
port speed duplex mode, link status, Flow control
status. Auto-negotiation status
VLAN
Port-based
VLAN, up to 49 VLAN groups
IEEE 802.1Q Tagged Based VLAN , 4K VLAN ID, up to 255
VLAN groups
¡@
Spanning
Tree
IEEE 802.1d,
IEEE 802.1w
Link
Aggregation
Supports 4
groups of 8-Port trunk
QoS
4 priority
queues.
Traffic classification based on Port Number, 802.1p
priority, DS/TOS field in IP Packet
¡@
IGMP
Snooping
v1 and v2
IGMP Port / Group Policy and Static Routing Port setting
¡@
Bandwidth
Control
Per port
bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
¡@
IEEE 802.3
10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000Base-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
¡@
Network
Media
10Base-T ¡V
UTP/STP category 3, 4 or 5 cable
100Base-TX ¡V UTP/STP category 5 cable
1000Base-T ¡V UTP/STP category 5e/6 cable
1000Base-SX -
¡C62.5/125£gm multi-mode fiber optic cable, up to 220m
¡C50/125£gm multi-mode fiber optic cable, up to 550m
1000Base-LX
¡C9/125£gm single-mode fiber optic cable, up to 120km
¡@(Vary on SFP Module)
¡@
Cost-effective Desktop Size / Fiber Capability /
Group Managed Switch
The PLANET WGSD-1022C is a desktop size Layer 2 Managed Fast
Ethernet Switch. It provides 8 10/100Mbps Fast Ethernet ports and 2
Gigabit TP/SFP interfaces. The compact-size design Switch not only
fits into space-limited environment but also is mountable in a
19-inch rack with attached rack-mounting kits. The equipped Gigabit
SFP slot makes the WGSD-1022C with capability of fiber link for
distance extending and can handle extremely large amounts of data in
a secured topology which is linked to a backbone or high capacity
servers.
The various supports of QoS mode and VLAN features make the WGSD
-1022C meet the needs of SOHOs, SMBs and enterprises in effective
data traffic control such as VoIP, video streaming and multicast
applications. The key features are shown as below:
¡@
• IP Stacking up
to 8 units
• 802.1Q VLAN
• Rapid Spanning
Tree
• SNMP / SNMP Trap
• IGMP Snooping
• SFP slots, Fiber link capability
Enhanced Layer 2 Features
The WGSD-1022C can be programmed for enhanced switch management
functions, such as per port speed configuration, Port Trunk in g,
VLAN, Rapid Spanning Tree, QoS, bandwidth control and IGMP Snooping.
The WGSD-1022C provides Port-based VLAN, 802.1Q Tagged VLAN and the
VLAN groups allowed on the WGSD-1022C will be maximally up to 255.
Via support in g port trunk in g, the WGSD-1022C offers the
operation of a high-speed trunk comb in in g multiple ports. It also
provides four groups of up to 8 ports for trunking and support s
fail-over.
Efficient Management ¡V Stacking Management
For efficient management, the WGSD-1022C is equipped with console
interface, Web interface and SNMP agent. With its built-in Web-based
management, the WGSD-1022C offers an easy-to-use,
platform-independent management and configuration facility. It
support s standard Simple Network Management Protocol (SNMP) and can
be managed via any standard-based management software. For
text-based management, the WGSD -1022C can also be accessed via
Telnet and the console port.
One of the management features of WGSD-1022C is the IP Stacking
function support. It helps network managers to easily configure up
to 8 switches in the same series via one single one IP address
instead of connecting and setting each unit one by one.
Back
pressure for half duplex, IEEE 802.3x Pause Frame for
full duplex
LED
Power,
Link/Act and speed per port
Console
Interface
One RS-232
DB-9 male connector for switch management
Dimension (W
x D x H)
280 x 173 x
44 mm, 1U height
Power
requirement
110~240V AC,
50/60Hz
Power
Consumption
12.2 watts /
41BTU
Weight
1.24 kg
Layer 2
function
Management
Interface
Console,
Telnet, Web Browser, SNMP v1 and v2c
Port
Configuration
Port disable
/ enable.
Auto-negotiation 10/100Mbps full and half duplex mode
selection.
Flow Control disable / enable. Bandwidth control on each
port.
¡@
Port Status
Display each
port speed duplex mode, link status, Flow control
status. Auto-negotiation status
VLAN
Port-based
VLAN, up to 49 VLAN groups
IEEE 802.1Q Tagged Based VLAN , 4K VLAN ID, up to 255
VLAN groups
¡@
Spanning
Tree
IEEE 802.1d,
IEEE 802.1w
Link
Aggregation
Supports 4
groups of 8-Port trunk
QoS
4 priority
queues.
Traffic classification based on Port Number, 802.1p
priority, DS/TOS field in IP Packet
¡@
IGMP
Snooping
v1 and v2
IGMP Port / Group Policy and Static Routing Port setting
¡@
Bandwidth
Control
Per port
bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
¡@
IEEE 802.3
10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000Base-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
¡@
Network
Media
10Base-T ¡V
UTP/STP category 3, 4 or 5 cable
100Base-TX ¡V UTP/STP category 5 cable
1000Base-T ¡V UTP/STP category 5e/6 cable
1000Base-SX -
¡C62.5/125£gm multi-mode fiber optic cable, up to 220m
¡C50/125£gm multi-mode fiber optic cable, up to 550m
1000Base-LX
¡C9/125£gm single-mode fiber optic cable, up to 120km
¡@(Vary on SFP Module)
¡@