PS4100X
PS4100X
¡@
¡@
Product Configurations
Storage Controllers
Dual controllers, each with 4GB1 memory
for PS-Series firmware. Each controller provides cache to flash for data
protection.
Hard Disk Drives
Twenty-four (24) 10K SAS hot-pluggable hard drives (Twelve (12) drive
configuration available. Please contact your Dell Sales Representative for
details.)
Drive Capacities
2.5" 10,000 RPM SAS drives available in 300GB1, 600GB1 and
900GB1
System Capacities
7.2TB1 using
twenty-four (24) 300GB1 10,000
SAS disk drives
14.4TB1 using
twenty-four (24) 600GB1 10,000
SAS disk drives
21.6TB1 using
twenty-four (24) 900GB1 10,000
SAS disk drives
Technical Highlights
Volumes
Up to 256
Snapshots
128 per volume /up to 2,048 total per group
Volume connections per PS series group
Up to 512 per pool / 1024 per group
Host Protocol
Any standards compliant iSCSI initiator
Operating Systems Supported
¡@
Windows® 2000 Server
Windows Server® 2003
Windows Server® 2008, including Hyper-V™
Windows Server® 2008 R2, including Hyper-V™
Windows Vista®
Windows XP®
VMware® ESX Server 3 / 3.5 / 4 / 4.1 / 5 / ESXi 3.5 / 4 / 4.1 / 5
Citrix® XenServer™
Red Hat® Enterprise Linux®
SUSE® Linux Enterprise
Sun™ Solaris™
IBM® AIX®
HP-UX®
Mac OS® X
Novell® Netware®
RAID Support
RAID 5, RAID 6, RAID 10 and RAID 50
Network Interfaces
Two (2) GbE copper, One (1) 10/100 copper (optional management network
only) per controller
TCP Network Support
IPv4, IPv6 core support
Expansion Option
Can be combined with other EqualLogic PS Series arrays in the same SAN group,
online. A maximum of two (2) PS4000, PS4100 and PS4110 Series arrays can be in a
group.
Reliability
Vertical port sharing
Redundant, hot-swappable controllers, power supplies / cooling fans, and
hot-swappable disks
Individual disk drive slot power control
Enclosure Monitoring System
Automatic spare configuration and utilization
SMART
Automatic bad block replacement
Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk
drives
Management Interfaces
SAN Headquarters (SAN HQ) multi-group
performance and event monitoring tool
SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
Serial console
Multi-administrator support
Ability to configure a separate management network
Security
CHAP authentication
Access control for iSCSI
Access control for management interfaces including RADIUS support
Notification Methods
SNMP traps, e-mail, syslog
Power
AC voltage: 100-240 VAC +10% single phase
700W (max, total), +5V up to 155W; +12V up to 624W; +5Vsb up to 10W
Frequency: 50/60 Hz
Power factor: 0.98 (minimum)
Power supplies: Dual 700 W
Environmental
Temperature range: 5¢X to 40¢XC (41¢X to 104¢XF)
Storage temperature: -40¢X to 65¢XC (-40¢X to 149¢XF)
Altitude: For altitudes above 2950 feet, the maximum operating temperature is
derated 1¢XF/550 ft
Operating relative humidity: 20% to 80% (noncondensing) with a maximum
humidity gradation of 10% per hour
Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms
+/- 10% in operational orientations only
Operating vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational
orientations
Acoustics Category 4: <=7.2 bels at 23C +/- 2C
Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985
Physical
Height: 2U / 8.68 cm (3.41 inches)
Width: 44.63 cm (17.57 inches)
Depth: 54.1 cm (21.3 inches)
Weight: 24.49 kg (54 lb)