-
-
ADVANCED FEATURES -
Best-in-class
RF
management
- All Aruba APs include Adaptive Radio Management technology, which is essential to creating the most reliable, high-performance WLANs. ARM manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and ensures that APs stay clear of RF interference.
- Spectrum
analysis
- Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4 GHz and 5 GHz radio bands to identify sources of RF interference.
- Security
- SecureJack-capable for secure tunneling of wired Ethernet traffic.
OPERATING MODES - Mobility Controller-managed AP
- Remote AP (RAP) for branch deployments
- Air monitor (AM) for wireless IDS, rogue detection and containment
- Spectrum analyzer, dedicated or hybrid
- Secure enterprise mesh
WIRELESS RADIO SPECIFICATIONS - AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 2x2:2
- Software-configurable dual radio supports 5-GHz (Radio 0) and 2.4-GHz (Radio 1)
- 2¡Ñ2 MIMO with two spatial streams and up to 300 Mbps wireless data rate
- Support for up to 32 associated client devices, and up to eight BSSIDs per radio
-
Supported
frequency
bands
(country-specific
restrictions
apply):
- 2.4000 GHz to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.850 GHz
- Available channels: Dependent on configured regulatory domain
- Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
-
Supported
radio
technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)
-
Supported
modulation
types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
- Transmit power: Configurable in increments of 0.5 dBm
- Maximum
(aggregate,
conducted
total)
transmit
power
(limited by
local
regulatory
requirements):
- 2.4-GHz band: +21 dBm (18 dBm per chain)
- 5-GHz band: +21 dBm (18 dBm per chain)
- Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
- Maximum ratio combining (MRC) for improved receiver performance
- Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
- Short guard interval for 20-MHz and 40-MHz channels
- Space-time block coding (STBC) for increased range and improved reception
- Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
-
Supported
data rates
(Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15)
- 802.11n high-throughput (HT) support: HT 20/40
- 802.11n packet aggregation: A-MPDU, A-MSDU
ANTENNAS - Two integrated dual-band omni-directional antennas for 2x2 MIMO with maximum antenna gain of 3.6 dBi in 2.4 GHz and 3.3 dBi in 5 GHz. Antennas are optimized for vertical wall mounted orientation of the AP.
OTHER INTERFACES - E0:
10/100/1000BASE-T
Ethernet
network
interface
(RJ-45)
- Auto-sensing link speed and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
- PoE-PD: 48 Vdc (nominal) 802.3af PoE
- E1-E2:
2x
10/100BASE-T
Ethernet
network
interfaces
(RJ-45)
- Auto-sensing link speed and MDI/MDX
- PT: Passive RJ-45 pass-through port
- DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
- Visual indicator (single tricolor LED): power/system status
- Dual-function push-button: Factory reset during device power up and LED on/off control during normal operation
- Serial console interface (proprietary; optional adapter cable available)
- Kensington security slot
-
Best-in-class
RF
management
-
POWER - Maximum (worst-case) power consumption: 9.4 watts PoE or 8.3 watts DC
- Maximum (worst-case) power consumption in idle mode: 3.5 watts PoE or 2.9 watts DC
- Direct DC source: 12 Vdc nominal, +/- 5%
- Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af compliant source
- Power sources sold separately
- When both power sources are available, DC power takes priority
MOUNTING - Included with AP: Mount plate for single-gang electrical/data wall-box (various worldwide standards)
- Spare mounting kit: AP-103H-MNT1: Mount plate for single-gang electrical/data wall-box (various worldwide standards)
- Optional mounting kit: AP-103H-MNT2: Mount plate for dual-gang electrical/data wall-box (various worldwide standards)
MECHANICAL -
Dimensions/weight
(unit,
excluding
mount
accessories):
- 86 mm (W) x 30 mm (D) x 140 mm (H), 3.39¡¨ (W) x 1.18¡¨ (D) x 5.51¡¨ (H)
- 260 g/9.17 oz
-
Dimensions/weight
(unit, as
mounted):
- 86 mm (W) x 31 mm (D) x 140 mm (H), 3.39¡¨ (W) x 1.22¡¨ (D) x 5.51¡¨ (H)
- 305 g/10.76 oz
-
Dimensions/weight
(shipping):
- 143 mm (W) x 49 mm (D) x 168 (H), 5.63¡¨ (W) x 1.93¡¨ (D) x 6.61¡¨ (H)
- 420 g/14.82 oz
- AP attaches securely to mount bracket using built-in security features. Removing the unit from the bracket requires a custom tool that ships with the product.
ENVIRONMENTAL -
Operating:
- Temperature: 0¢X C to +40¢X C (+32¢X F to +104¢X F)
- Humidity: 5% to 95% non-condensing
- Storage
and
transportation
temperature
range:
- Temperature: -40¢X C to +70¢X C (-40¢X F to +158¢X F)
REGULATORY - FCC/Industry of Canada
- CE Marked
- R&TTE Directive 1995/5/EC
- Low Voltage Directive 72/23/EEC
- EN 300 328
- EN 301 489
- EN 301 893
- UL/IEC/EN 60950
- EN 60601-1-1 and EN 60601-1-2
RELIABILITY MTBF: 500,858 hours (57.2 years) at +25¢X C operating temperature REGULATORY MODEL NUMBER - AP-103H: APINH103
CERTIFICATIONS - CB Scheme Safety, cTUVus
- Wi-Fi Alliance (WFA) certified 802.11a/b/g/n
WARRANTY Aruba limited lifetime warranty MINIMUM SOFTWARE VERSION - ArubaOS 6.4.1.0
-