General Specifications
·
The LPe16000 series is powered by two XE201 converged fabric controllers and
consists of an eight-lane (x8) PCIe 3.0 bus (backward compatibility to PCIe 2.0
supported). The XE201 controller is capable of Fibre Channel, and for certain
adapters, Ethernet. Each of the XE201 controllers is capable of providing up to
1.2 million IOPS on a single-port, delivering the highest single-port IOPS
performance in the industry.
Industry Standards
·
Current ANSI/IETF Standards: FC-PI-4; FC-PI-5; FC-FS-2 with amendment 1; FC-AL-2
with amendments 1 and 2; FC-LS-2; FC-GS-6; FC-DA; FC-SP-2; FCP-4; FC-MJS;
FC-SB-4; FC-SP; SPC-4; SBC-3; SSC-3; RFC4338
·
Legacy ANSI/IETF standards: FC-PH; FC-PH-2; FC-PH-3; FC-PI; FC-PI-2; FC-FS;
FC-AL; FC-GS-2/3/4/5; FCP; FCP-2; FC-SB-2; FC-FLA; FC-HBA; FC-PLDA; FC-TAPE;
FC-MI; SPC-3; SBC-2; SSC-2; RFC2625
·
PCIe base spec 3.0
·
PCIe card electromechanical spec 3.0
·
Fibre Channel class 2 and 3
·
PHP hot plug-hot swap
Architecture
·
Quad-port 16GFC HBA
·
Supports 16GFC, 8GFC and 4GFC link speeds, automatically negotiated
·
Supports four FC ports at 16GFC max
·
Integrated data buffer and code space memory
Comprehensive OS & Hypervisor Support
·
Windows Server
·
Linux
·
Solaris
·
VMware vSphere
·
Windows Hyper-V
·
Additional support is available from OEMs and partners
Hardware Environments
·
PowerPC, SPARC, x86, x64 and Intel Itanium 64-bit processor family
Optical
·
Data rates: 14.025 Gb/s (1600Mb/s); 8.5 Gb/s (800Mb/s); 4.25 Gb/s (400 Mb/s)
(auto-detected)
·
Optics: Short wave lasers with LC type connector
·
Cable: Operating at 16Gb
·
15m at 16Gb on 62.5/125 μm OM1 MMF
·
35m at 16Gb on 50/125 μm OM2 MMF
·
100m at 16Gb on 50/125 μm OM3 MMF
·
125m at 16Gb on 50/125 μm OM4 MMF
Physical Dimensions
·
PCI full-height, half-length form factor card
·
111.15mm x 167.64mm (4.376” x 6.600”)
·
Standard bracket
Power & Environmental Requirements
Power supply 1.8V, 1.2V, 0.9V
·
Volts: +3.3, +12
·
Operating temperature: 0° to 55° C (32° to 131° F)
·
Storage temperature: -40° to 70° C (-40° to 158° F)
·
Relative humidity: 5% to 95% non-condensing
·
23° C wet bulb
Agency and Safety Approvals
Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1*
·
UL recognized to UL 60950-1 2nd edition
·
cUR recognized to CSA22.2, No. 60950-1-07
·
TUV Bauart-certified to EN60950-1:2006 +A11+A1+A12
·
FCC Part 15, Class A
·
ICES-003:2012, Class A
·
EMC Directive 2004/108/EC (CE Mark)
·
EN55022:2010, Class A
·
EN55024:2010
·
Australian EMC Framework (C-Tick Mark)
·
AS/NZS CISPR:2009 +A1, Class A
·
VCCI Class A
·
BSMI Class A
·
CNS13438:2006 (complete)
·
MSIP (formally KCC/MIC), Class A
·
EU RoHS Compliant (Directive 2011/65/EU)
·
China RoHS Compliant
Added Features
Performance Features
·
Doubling the maximum FC link rate from 8GFC to 16GFC and enhanced virtualization
capabilities, help support IT “green” initiatives.
·
Frame-level multiplexing and out-of-order frame reassembly increases link
efficiency and maximizes HBA performance.
Data Protection Features
·
End-to-end data protection with hardware parity, CRC, ECC and other advanced
error checking and correcting algorithms ensure data is safe from corruption.
·
Enhanced silent data corruption protection provided by T10 PI with
high-performance offload.
Deployment and Management Features
·
Universal boot capability allows the appropriate boot environment to be
automatically selected for any given hardware.
·
Boot from SAN capability reduces system management costs and increases uptime.
·
Detailed, real-time event logging and tracing enables quick diagnosis of SAN
problems.
·
Beaconing feature flashes the HBA LEDs, simplifying their identification within
server racks.
·
Environmental monitoring feature helps optimize SAN availability.
Management Features
·
The Emulex OneCommand Manager application enables centralized discovery,
monitoring, reporting, and administration of adapters provided by Emulex on
local and remote hosts. Powerful automation capabilities facilitate remote
driver parameter, firmware and boot code upgrades.
·
Advanced diagnostic features, such as adapter port beaconing and adapter
statistics, help optimize management and network performance, while the
environmental monitoring feature helps to maintain optimum host-to-fabric
connections. In addition to the GUI interface, management functions can also be
performed via a scriptable Command Line Interface (CLI) as well as a web
browser.
·
OneCommand Manager supports role-based management to facilitate administration
of adapters throughout the data center without compromising security. Management
privileges can be assigned based on LDAP and AD group memberships.
·
Emulex’s management instrumentation complies to open management standards, such
as SMI-S and common HBA API support, which enables seamless upward integration
into enterprise storage and server management solutions.
